Quick answer
Compare the whole-window NFRC ratings, not just claims such as “low-E” or “triple-pane.” A lower U-factor means less heat transfer; a lower SHGC means less solar heat enters; a higher visible transmittance means more daylight passes through. The right combination depends on your climate and window exposure—not simply the lowest numbers. Check ENERGY STAR eligibility for your location, then verify the exact configuration being quoted. (efficientwindows.org)
1. Start with the product identity, then read the numbers
An NFRC label provides standardized performance information for comparing windows. ENERGY STAR serves a different purpose: it identifies products meeting EPA’s requirements for a particular climate zone. An NFRC-certified window is not automatically ENERGY STAR certified. (efficientwindows.org)
Before comparing ratings, check the label’s identification area. NFRC’s labeling requirements include the manufacturer’s identification, full Certified Products Directory—or CPD—identification, frame type and product type. A series name and glazing description may also appear. These details help connect the performance numbers to the window you are actually ordering. (cdn.ymaws.com)
Read the main fields this way:
| Label field | What it tells you | How to use it |
|---|---|---|
| Manufacturer, product type and CPD identification | Which certified product the label represents | Match it to the written quote |
| U-factor | Resistance to heat transfer | Lower means better insulation |
| Solar heat gain coefficient, or SHGC | How much solar heat enters | Lower limits solar gain; climate determines the desirable level |
| Visible transmittance, or VT | How much visible light passes through | Higher admits more daylight |
| Air leakage, when shown | Air passing through the product under rating conditions | Read the units and any “≤” symbol carefully |
These are separate measurements, not components of one overall score. NFRC’s sample label also explains that ratings describe whole-product performance under fixed environmental conditions and at a specific product size—not a prediction for every opening in your house. (nfrc.org)
Practical check: Ask for the label or certified performance information for each quoted configuration before approving the order.
2. Separate insulation performance from solar heat gain
U-factor answers: “How readily does heat pass through this window?”
Lower is better for insulating performance. Do not confuse it with the R-value commonly used for insulation: with R-value, higher is better; with U-factor, lower is better. Compare whole-window ratings rather than mixing a glass-only claim with another product’s complete-window rating. (efficientwindows.org)
Check the units too. U.S. labels use U.S./I-P values, while metric/SI values may also appear. Numbers expressed in different unit systems cannot be compared directly. The ENERGY STAR thresholds below use U.S. units: Btu/(h·ft²·°F). (cdn.ymaws.com)
SHGC answers: “How much heat from sunlight enters through this window?”
SHGC runs from 0 to 1. Lower values admit less solar heat, while higher values admit more. That makes a low SHGC useful for limiting unwanted solar gain, but not automatically preferable for every cold-climate window. (nfrc.org)
For example, useful winter sun may be worth considering on a south-facing opening in a heating-dominated home. The same home’s east- and west-facing windows may still need solar control and shading. Orientation matters alongside climate. (basc.pnnl.gov)
Common mistake: Treating low U-factor and low SHGC as interchangeable benefits. One concerns insulation; the other concerns solar heat. Compare both.

3. Check daylight and air leakage separately
Visible transmittance is not SHGC. VT describes visible light, not solar heat gain. A higher VT means more daylight passes through the product. Different coatings and treatments allow different combinations of light and heat transmission, so compare both numbers rather than assuming a solar-control window must be dark. (efficientwindows.org)
If two shortlisted windows meet your thermal requirements but have different VT ratings, ask to view representative glass samples. Use that check to consider appearance and daylight preferences; do not treat a sample as a measurement of how bright the completed room will be.
Air leakage requires a different reading. It is optional on the NFRC label. Under NFRC’s published labeling requirements, a window’s displayed U.S. air-leakage value is “≤ 0.3” when authorized—not necessarily its exact measured result. Two windows showing that same threshold therefore cannot be ranked for airtightness from that label alone. (cdn.ymaws.com)
ENERGY STAR requires window air leakage of no more than 0.3 cfm/ft². Its specification permits compliance to be demonstrated through the NFRC label or specified structural-certification labels. A missing air-leakage field on the NFRC sticker is therefore not, by itself, proof that a window fails ENERGY STAR requirements. (energystar.gov)
Ask for supporting documentation if airtightness is a deciding factor. Also keep installation in the comparison: NFRC warns that even high-performing windows may not perform as expected without proper installation. (efficientwindows.org)
4. Match ENERGY STAR criteria to your U.S. climate zone
Use ENERGY STAR’s state-and-county Climate Zone Finder, rather than guessing from a broad regional description. Its window program has four named zones: Northern, North-Central, South-Central and Southern. (energystar.gov)
As checked on November 22, 2026, EPA’s linked residential-window criteria use Version 7.0. The standard qualification route is: (energystar.gov)
| ENERGY STAR window zone | Maximum U-factor | SHGC requirement |
|---|---|---|
| Northern | 0.22 | At least 0.17 |
| North-Central | 0.25 | No more than 0.40 |
| South-Central | 0.28 | No more than 0.23 |
| Southern | 0.32 | No more than 0.23 |
The Northern zone also has alternative equivalent-energy-performance combinations: U-factors of 0.23 or 0.24 paired with SHGC of at least 0.35, or U-factors of 0.25 or 0.26 paired with SHGC of at least 0.40. Do not reject a Northern-zone certification solely because its U-factor exceeds 0.22. (energystar.gov)
These are certification thresholds, not a complete design recommendation or an energy-bill forecast. NFRC explicitly does not warrant a product’s suitability for a particular use. A certified window still needs to suit your exposure, project requirements and installation conditions. (nfrc.org)
Also, use the window criteria for windows. Doors and skylights have separate requirements; do not apply this table to a patio door merely because it contains substantial glass. (energystar.gov)
5. Treat low-E coatings and gas fills as features—not final answers
Low-emissivity, or low-E, coatings are thin metallic layers applied to glass. Manufacturers use different coatings to produce different thermal characteristics for different climates. “Low-E included” therefore does not tell you the finished window’s U-factor, SHGC or VT. (efficientwindows.org)
Argon and krypton are gases used between panes to reduce heat transfer compared with air-filled glazing. They contribute to performance, but the gas name alone does not establish the complete window’s rating. (efficientwindows.org)
Frames, spacers and glazing all contribute to whole-window energy performance. That is why comparing only pane count—or only the glass package’s marketing name—leaves important information out. (efficientwindows.org)
Ask the supplier to identify:
- The exact glass-package or coating designation.
- Whether the quote includes the specified gas fill.
- The corresponding whole-window U-factor, SHGC and VT.
- The CPD identification supporting those ratings.
Use these details to compare the finished configurations. ENERGY STAR does not require a particular technology, so certification should not be interpreted as a requirement for one pane count, coating or gas. (energystar.gov)

6. Work through a heating-versus-cooling comparison
The following numbers are hypothetical teaching examples, not measured products, supplier claims or verified certifications.
| Illustrative configuration | U-factor | SHGC | VT |
|---|---|---|---|
| A | 0.22 | 0.30 | 0.50 |
| B | 0.28 | 0.20 | 0.45 |
Heating-dominated U.S. example: For a project confirmed to be in the Northern zone, A meets the table’s U-factor and SHGC thresholds. B does not meet either the standard Northern U-factor limit or its alternative combinations. This is a numerical screening exercise only; actual certification must still be verified. (energystar.gov)
A’s higher SHGC could be relevant where winter solar gain is useful. However, the decision should still account for summer conditions, orientation and shading. A sunny west-facing room should not receive a high-solar-gain recommendation simply because the house is in a cold region. (basc.pnnl.gov)
Cooling-dominated U.S. example: For a project confirmed to be in the Southern zone, B meets the table’s thermal thresholds. A has the lower U-factor but exceeds the Southern SHGC maximum of 0.23. Choosing solely by U-factor would miss that distinction. (energystar.gov)
B also has lower VT, meaning less daylight transmission under the rating conditions. That trade-off deserves attention, but neither configuration’s numbers establish annual savings, payback or the best choice for a specific home. (nfrc.org)
The useful result is not “A wins” or “B wins.” It is a shortlist matched to the project’s climate, followed by configuration and certification checks.
7. Verify the quoted configuration before ordering
Use the label as the beginning of your verification, not the end.
- Request the full CPD identification. Do not stop at a brand or series name. NFRC requires full CPD identification on the temporary label. (cdn.ymaws.com)
- Check the NFRC Certified Products Directory. Its label-search tool accepts product type, U-factor, SHGC and VT, with manufacturer filtering available. Use it to check the quoted label information. (cpd.nfrc.org)
- Check ENERGY STAR status separately. Ask the supplier to show the certification record and applicable climate-zone eligibility for the configuration being ordered—not merely a logo in a general brochure. ENERGY STAR certification depends on meeting the program’s requirements. (energystar.gov)
- Put the agreed specification in writing. Request product type, frame, glass package, gas fill, ratings and CPD identification in the order documents.
- Check delivered labels before removal. Photograph them and retain the product records. NFRC advises leaving labels in place until after installation and keeping them afterward. (efficientwindows.org)
Pause the order if the paperwork mixes U.S. and metric values, substitutes glass-only performance for whole-window ratings, or leaves the quoted glass option unclear. Those gaps prevent a reliable comparison. (cdn.ymaws.com)
Finally, compare installation scope as carefully as product specifications. Ask who is responsible for following the manufacturer’s instructions and documenting the completed work. Good label numbers are useful evidence—but proper installation remains essential. (efficientwindows.org)